Products

Industrial Products Overview This range of industrial products covers core electromechanical components and power generation equipment for industrial, commercial, and distributed energy applications. Products in this catalogue include permanent magnet synchronous motors (PMSM), variable frequency drives (VFD), rotary encoders, motor rotors, permanent magnet generators (PMG), diesel generators, and motor controllers — each of these products designed to address specific performance requirements in power conversion, motor control, and energy generation across demanding operating environments. Evaluating these products from a procurement standpoint means weighing total cost of ownership against delivery reliability — not just unit price. The products in this range span from component-level supply items (rotors, encoders) through to complete system-level products (generator sets, diesel gensets), enabling industrial buyers to source complementary products from a single supplier with consistent product standards. Whether the requirement is for individual component products or complete power system products, this catalogue supports both procurement approaches. Key Characteristics Across Products These products each carry technical characteristics that define the selection decision: PMSM Motor Products (TYB and TYDP Series): These motor products achieve IE4/IE5 ultra-premium efficiency ratings covering 0.55–2500 kW. The TYDP direct-drive motor products eliminate the gearbox entirely for low-speed, high-torque requirements, with rated torque up to 100,000 N·m. Motor products in this series feature IP55 protection and F-class insulation as standard, operating between -40°C and +55°C. These motor products deliver 15–30% energy savings compared to conventional induction motor alternatives. VFD Products: Variable frequency drive products span 0.75 kW to 75 kW with enclosure protection from IP20 to IP65. High-power VFD products include an active front-end rectifier delivering Encoder Products: Rotary encoder products cover incremental and absolute types at 1000–2000 PPR, with EtherCAT and CANopen interface options. Encoder products with IP67 protection and SIL2 functional safety certification are available for traction motor and EV drivetrain applications. Hollow-shaft encoder products support Ø30–60 mm bore configurations. Rotor Products: Motor rotor products are available in aerospace-grade 6061-T6 aluminum (Ø65 mm compact products) and forged carbon steel (up to Ø320 mm, 150 kW class products). All rotor products carry dynamic balance certification to ISO 1940 Grade G2.5 for low-vibration operation. Permanent Magnet Generator Products (PMG): PMG products span 5 kW to 250 kW at 400V to 11 kV with Class H insulation for continuous duty. The 250 kW heavy-duty PMG products offer ATEX Zone 2 certification and UL listing for offshore wind and hazardous area deployments. These generator products comply with IEC 60034 and ISO 9001. Diesel Generator Products: Diesel generator products provide 8 kW to 160 kW prime power in configurations from compact IP23 commercial products to fully soundproofed industrial canopy products (≤65 dB at 7 m). The top-of-range diesel generator products include EPA Tier 4 Final certification with a Cummins engine and integrated ATS for critical power infrastructure. Motor Controller Products: Controller products span 0.75 kW to 45 kW, with vector control, Modbus RTU, and CANopen fieldbus interface options. SIL2-certified controller products housed in stainless steel IP66 enclosures are available for harsh-environment applications including mining and marine installations. Common Applications for These Products Products across this range serve several overlapping market segments, each with distinct performance and certification requirements: Industrial Drive Systems: PMSM motor products and controller products are deployed in pumps, compressors, fans, conveyors, ball mills, and cooling towers where energy-efficient, variable-speed operation is required. VFD products extend speed control across variable-load duty cycles, reducing energy consumption relative to fixed-speed drive alternatives. Distributed and Off-Grid Power Generation: PMG products serve off-grid installations, remote electrification sites, island-grid systems, and hybrid wind-solar configurations. These generator products span 5–250 kW, covering deployments from small off-grid residential systems through distributed energy project scale. These products are designed for environments where grid access is limited or unavailable. Emergency and Backup Power: Diesel generator products provide prime and standby power capacity for commercial facilities, construction sites, manufacturing plants, data centers, and hospitals. The certification range across these generator products includes CE for European markets and EPA Tier 4 Final for North American critical infrastructure applications. Telecom and Critical Infrastructure: Compact generator products and high-reliability motor products support base station power assurance and remote communication infrastructure where grid availability cannot be guaranteed. For these applications, validated cold-start performance across a wide ambient temperature range is the primary product selection criterion. OEM and System Integration: Encoder products, rotor products, and controller products are used by OEM motor manufacturers and system integrators for custom motor builds, servo drive systems, and EV drivetrain configurations — where matched product specifications reduce integration complexity and commissioning time. How to Choose the Right Products The shift that changes how you specify motor products is realizing that peak nameplate efficiency only matters if your load profile actually reaches rated load — which most real industrial applications do not. Matching products to actual duty cycle, rather than selecting on peak efficiency figures alone, is the starting point for avoiding over-specified or under-specified equipment. It is true that PMSM motor products carry higher upfront costs than induction motor alternatives at equivalent power ratings — and for applications running consistently at or near full load, this cost premium may not recover quickly. But for variable-load applications such as pumps and fans, the partial-load efficiency advantage of these motor products typically generates favorable lifecycle economics when compared against lower-efficiency alternative products over a multi-year deployment horizon. For most products in this range, the purchase decision starts with unit price, but the metric that matters most over a 5–10 year deployment is total maintenance cost. For remote-site diesel generator products, fuel access logistics and maintenance intervals are the dominant lifecycle cost drivers. For PMSM motor products replacing legacy equipment, the relevant comparison is cumulative energy savings against the incremental cost difference between premium and standard-efficiency products. Key evaluation criteria by product type: Motor products: Duty cycle and load profile, ambient temperature range (-40°C to +55°C operating limit), required IP protection class, power range (0.55–2500 kW), VFD drive compatibility. PMG products: Required output power (5–250 kW), voltage and frequency standard for the target market, installation environment class (standard industrial, offshore, ATEX Zone 2), connection to storage or inverter systems. Diesel generator products: Prime power vs. standby duty designation, site noise restrictions, fuel logistics, and applicable certification requirement (CE, ISO 8528, EPA Tier 4 Final). VFD products: Motor type compatibility, harmonic compliance standard (IEEE 519 or equivalent), enclosure protection rating for the installation environment (IP20–IP65). Encoder products: Interface protocol (EtherCAT or CANopen), shaft configuration (solid or hollow bore), PPR resolution, and SIL2 functional safety requirement. Controller products: Rated power and supply voltage, fieldbus interface protocol, safety certification level, and enclosure protection class for the installation environment. If installation site conditions fall outside standard test parameters — particularly ambient temperatures above 40°C or altitude above 1000 m — power output and efficiency figures for the relevant products should be derated before finalizing equipment sizing. This applies to both motor products and generator products used in high-altitude or tropical-climate deployments. Why These Products Matter for Industrial Buyers B2B buyers for motor and generator products typically involve engineering, procurement, and operations stakeholders, each evaluating products against different criteria. Buyers often cannot readily verify whether an efficiency claim for a given product is based on real operating conditions or idealized lab test parameters — making third-party certification documentation a practical first filter when comparing competing products from different suppliers. These products are designed to cover both component OEM supply and complete system configurations, enabling buyers to source motor products, drive products, generator products, and control products from a single supplier with consistent standards. For project buyers assembling a bill of materials, consolidated procurement of complementary products reduces supplier qualification workload and integration compatibility risk. For OEM buyers designing new equipment, access to the full drive system product family — motor products, encoder products, controller products, and VFD products — within a single supplier relationship simplifies specification management and reduces commissioning schedule risk. Products across this range are qualified to relevant international standards including IEC 60034 for rotating electrical machinery, ISO 9001 for manufacturing quality assurance, and product-specific certifications (UL, CE, ATEX Zone 2, EPA Tier 4 Final) where applicable to the specific product and target market. When sourcing any of these products for export to regulated markets, verifying that the product certification profile matches the target market's import and installation requirements is a practical qualification step before engaging on commercial terms.